- Gigabyte ultra durable bios update how to#
- Gigabyte ultra durable bios update install#
- Gigabyte ultra durable bios update upgrade#
- Gigabyte ultra durable bios update Pc#
- Gigabyte ultra durable bios update free#
Save the changes you’ve made, reboot and you should be booting straight into OS X. The downside in this case is that all of your SATA devices will appear as removable drives.
Gigabyte ultra durable bios update install#
OS X does detect when you attach SATA/eSATA devices, but there’s no way of disconnecting so the OS sees that the drive has been disconnected, unless you install the third party eSATA driver that comes with MultiBeast. We’re not entirely sure why it has been done this way, as it should simply work as long as AHCI is enabled, but under System and ATA Port Information there’s an option to enable Hot Plug support per port. OS X won’t boot if the boot drive is set to UEFI, so make sure to double check this.įinally, if you’re using eSATA drives connected to the Intel SATA ports, Gigabyte has added a setting for Hot Plug support.
Gigabyte ultra durable bios update Pc#
ErP is a low power setting, so if you’re relying on your PC to charge USB devices when powered off, don’t enable this.Īnother setting that is useful to be aware of is located under the BIOS Features settings and the first one is your Boot Option’s as drive #1 should be selected in a similar manner to the screenshot below. Under the Power Management settings, make sure High Precision Event Timer (HPET) is enabled. You shouldn’t have to change anything else here. The key settings you need to change are under the Peripherals section, as here you need to set the SATA Mode Selection to AHCI, configure your graphics depending on if you’re using a discrete card or integrated graphics, as well as enable EHCI Hand-off. Select to enter the UEFI to set up all the settings. You should now be greeted by a message that will allow you to boot, load default settings and boot, or enter the UEFI. Re-connect the power and power your system back on. Once the BIOS has been flashed, you’ll be asked to power off your system and cut the mains power to the system. Reboot the system, hit F12 and select to boot from the USB drive. You might want to save it elsewhere if you’ve made custom edits to it and then roll a fresh DSDT file once you’ve flashed the BIOS.
One important thing to remember to do before you restart your system, is to find your DSDT file in the Extra folder and delete it, as it won’t be needed once you’ve upgraded to UEFI. Once you’ve created the bootable USB key, simply copy the files you downloaded from Gigabyte’s website (after having extracted them) onto the USB drive and you’re almost ready to flash the BIOS.
Gigabyte ultra durable bios update how to#
You also need a DOS bootable USB stick and our very own MacMan has a guide as to how to create one from within OS X if you again don’t have a dual boot system. The files are archived with 7-zip in a Windows self-extracting file, so if you don’t have a dual boot system, you’ll need a compatible un-archiver.
Gigabyte ultra durable bios update upgrade#
Make sure you download the correct upgrade for your specific motherboard, as some model names are very similar. So what do you need to get started? Well, you need to download the UEFI BIOS upgrade from Gigabyte’s website for starters. Flashing from a USB drive is fast, reasonably simple and safe.
Gigabyte ultra durable bios update free#
Beyond this, it’s pretty risk free upgrading your BIOS/UEFI these days, as long gone are the days of the floppy disk. Usually there are ways around this and in the case of most Gigabyte motherboards, the secondary BIOS chip would kick in if the flash failed. Flashing your motherboard BIOS is always somewhat risky, especially if you live in an area with frequent brownouts/power cuts, as a failed BIOS upgrade could result in an unusable motherboard. At the moment a wide range different Z68 models can be upgraded to UEFI, but we know some of you have been reluctant to do so and as such we thought we’d provide a short guide on how to upgrade to UEFI. Currently it appears to be only for the Z68 chipset based boards, but supposedly we can expect it for some P67 models too. A little while back Gigabyte also started to offer UEFI upgrades for many of its older 6-series motherboards, with more coming in the future. You may have heard about the new UEFIs on 7-series Gigabyte motherboards that enable sleep/wake without DSDT. Building a CustoMac Hackintosh: Buyer's Guide
0 kommentar(er)
